Home → Desktops → Motherboards → Clearing BIOS settings - H110M

1.9. Clearing BIOS settings - H110M

To clear CMOS BIOS settings and return to factory:

1) Remove power and open side of PC.

2) Using this diagram, locate the CLRTC jumper pins. 

Note: You may need to remove the graphics card if one is installed.

3) Use a screwdriver, paperclip, or anything metallic and touch across the two pins for about 20 seconds.  When performing this step, do not bend one pin into the other.

4) After the 20 seconds, remove the metallic object.

5) Reinstall graphics card if one was present.

NOTE:  If the PC contained a graphics card, AND the front USB cable passes over the CLRTC pins, be sure the cable is snuggled beside the pins before the graphics card is reinserted.

You may now reattach the side panel, apply power, and test.

 

DS